top of page

ABOUT THE BATTERY
 

The Forever Powered 200amp/hr Lifepo4 Battery has been carefully designed with a larger BMS to allow Constant load outputs of up to 200Amps. It is Ideal for use in Confined space where larger batteries cannot be used due to space restrictions.

 

Size : 550 x 115 x 320mm
 

The Battery can be used safely in conjunction with 2000w / 4400Va Inverters - (In Lieu of twin 100Amp hr Lifepo4  batteries) to achieve a higher constant load output offering that extra bit of leeway when using 2000w items that may require surge power on start up where the majority of 200 amp Batteries will trip out.

 

This is a maintenence free battery - It can be run flat and stored flat without harm - however all Lifepo4 Batteries are reccommended to be stored long term at half charge...Float Levels on this battery are 13.6Volts. The Battery Should be considered Flat at 12 Volts. 

Voltage levels will drop during heavy discharge. (and Return again afterward) If discharging the battery lowers the battery below 12 volts - this should be considered to much power drain, and the appliance turned off / not used again. 
 

In The Event of Misuse - The Built in  BMS (Battery Management System) will  cut out before dangerously low battery levels are reached shut down power completely for 15 seconds before an attempt at restarting... The Appliance causing the Large Discharge should be switched off to allow the battery to restart.

 

It is reccommended that the battery be charged with a dedicated Lifepo4 charger and settings on charge voltage are set to 14.5Volts.

 

ELECTRICAL SPECS

Nominal Voltage 12.8V
Nominal capacity 200Ah
Energy 4580WH Internal
Resistance 20MΩ
Self Discharge Voltage Window
Cycle life Maximum Modules in Parallel or series T
BD CHARGING/CC-CV Recommended
Maximum charge current 100A
Standby Use 13.8-14V
Cycle Use Max Charge Voltage 14.6V
Balancing Volate Balancing Current NA (Self managed)

DISCHARGE RECCOMMENDATIONS 

Max Continuous Discharge Current 200A
Recommended Discharge Current 40A for Maximum Battery Life
Peak Discharge Current 400A
Low Voltage disconnect 10V
BMS Cut-off Voltage Short Circuit Protection Built In to BMS
MECHANICAL Weigt/KG 22Kg
Dimensions(L*W*H) 550x115x320mm
Terminal/mm M8 Container material ABS+PC
IP Rating IP65 Cell of Type LiFePo4

OPERATING CONDITION BUILT IN CIRCUIT PROTECTION

Battery Management System(BMS)is incorporated against abuse.

 

 

 

 

 

High Output 200AH Slimline LifePo4 Battery

$1,150.00Price
  • ABOUT THE BATTERY
     

    The Forever Powered 100amp/hr Lifepo4 Battery has been carefully designed with a larger BMS to allow Peak outputs of up to 150Amps. It is Ideal for use in Confined space where larger batteries cannot be used due to space restrictions.
     

    The Battery can be used in conjunction with 1000w / 1200Va Inverters - (In Lieu of twin 100Amp hr Lifepo4  batteries) to achieve a higher constant load output offering that extra bit of leeway when using 1000w items that may require surge power on start up where the majority of 100amp Batteries will trip out.

     

    This is a maintenence free battery - It can be run flat and stored flat without harm - however all Lifepo4 Batteries are reccommended to be stored long term at half charge...Float Levels on this battery are 13.6Volts. The Battery Should be considered Flat at 12 Volts. 

    Voltage levels will drop during heavy discharge. (and Return again afterward) If discharging the battery lowers the battery below 12 volts - this should be considered to much power drain, and the appliance turned off / not used again. 
     

    In The Event of Misuse - The Built in  BMS (Battery Management System) will  cut out before dangerously low battery levels are reached shut down power completely for 15 seconds before an attempt at restarting... The Appliance causing the Large Discharge should be switched off to allow the battery to restart.

     

    It is reccommended that the battery be charged with a dedicated Lifepo4 charger and settings on charge voltage are set to 14.5Volts.

     

     

    ELECTRICAL SPECS

    Nominal Voltage 12.8V
    Nominal capacity 100Ah
    Energy 1280WH Internal
    Resistance 20MΩ
    Self Discharge Voltage Window
    Cycle life Maximum Modules in Parallel or series T
    BD CHARGING/CC-CV Recommended
    Maximum charge current 50A
    Standby Use 13.8-14V
    Cycle Use Max Charge Voltage 14.6V
    Balancing Volate Balancing Current NA (Self managed)

    DISCHARGE RECCOMMENDATIONS 
    Max Continuous Discharge Current 150A
    Recommended Discharge Current 20A for Maximum Battery Life
    Peak Discharge Current 200A
    Low Voltage disconnect 10V
    BMS Cut-off Voltage Short Circuit Protection Built In to BMS
    MECHANICAL Weigt/KG 11Kg
    Dimensions(L*W*H) 395x110x287mm
    Terminal/mm M8 Container material ABS+PC
    IP Rating IP65 Cell of Type LiFePo4

    OPERATING CONDITION BUILT IN CIRCUIT PROTECTION

    Battery Management System(BMS)is incorporated against abuse.

     



    Suitable for use in a wider range of applications where ambient temperature is unusually high: up to+60°C. 8V 1200A/250uS Charge Temperature 0℃ to 45℃(32℉ to 113℉) @60±25% Relative Humidity Discharge Temperature -20℃ to 60℃(-4℉ to 140℉) @60±25% Relative Humidity

     

     

     

bottom of page